Project Description

Axial Hollow Cone Nozzle

Axial Hollow Cone Nozzle can produce hollow cone-shaped spraying, and spray area is annular with its uniform distribution.

axial hollow cone nozzle
  • Model No.: AD Series.

  • Material: Stainless Steel.

  • Spray Pattern: Hollow cone.

  • Spray Angle : 50-90 Degree

  • Thread Size: 3/8″ , 1/2″ , 3/4″ , 1-1/2″.

The nozzles spray into small liquid droplets and can avoid clogging with its large and easy passing routeway.

axial hollow cone nozzle

The spray cap can be interchanged between pipes of different size. It can produce a spray pattern of wide spray angle.

The section projection of this axial hollow cone nozzle is a bit of low when it’s connected with T joint or pipe collection, it’s widely used in coal ash control.

Nozzle Size and Weight

size and weight form

Common Application

Axial hollow cone nozzle is usually used for dust suppression and cooling, its wild spray angle and easy to replace and installment attract many clients.

Choosing your nozzle in above form or directly inquiry our engineer about your requirement via below form.

Axial Hollow Cone Nozzle Performance data

axial hollow cone nozzle performance data

Nozzle Inlet Conn. NPT or BSPT (out.) Nozzle Type Capa. Size Inlet Dia No. Size (mm) Orifice Dia. (mm)  Capacity (L/min) Spray Angle (°)
AD 0.2 bar 0.5 bar 1.5 bar 3 bar 6 bar 7 bar 0.3 bar 0.7 bar 6 bar
3/8 2 2.4 2 1.1 1.6 2.2 2.4 60 70
3 2.4 2.4 0.96 1.7 2.4 3.3 3.6 52 64 77
5 2.8 3.2 1 1.6 2.8 3.9 5.6 6 56 67 76
8 4 4 1.6 2.6 4.5 6.3 8.9 9.6 56 65 70
10 4 4.4 2 3.2 5.6 7.9 11.2 12.1 55 65 72
20-10 *4 4.4 4.5 7.8 11.1 15.6 16.9 61 65 67
1/2 5 3.2 3.6 1 1.6 2.8 3.9 5.6 6 63 73 79
8 4 4 1.6 2.6 4.5 6.3 8.9 9.6 61 69 73
10 4.4 4.4 2 3.2 5.6 7.9 11.2 12.1 63 70 74
15 *4.4 5.2 3.1 4.8 8.4 11.8 16.7 18.1 60 67 70
20 *4.8 6 4.1 6.4 11.2 15.8 22 24 63 65 69
25 *5.2 7.1 5.1 8.1 14 19.7 28 30 59 63 68
3/4 5 3.6 3.2 1 1.6 2.8 3.9 5.6 6 64 73 79
8 4.4 4 1.6 2.6 4.5 6.3 8.9 9.6 62 70 74
10 5.2 4.4 2 3.2 5.6 7.9 11.2 12.1 64 72 75
15 6.4 5.6 3.1 4.8 8.4 11.8 16.7 18.1 64 72 74
20 7.1 6.4 4.1 6.4 11.2 15.8 22 24 63 70 74
25 7.1 7.5 5.1 8.1 14 19.7 28 30 63 70 74
50-50.3 *7.1 9.5 10.2 16.1 28 39 56 60 70 72 73
1-1/2 40 *9.5 7.9 8.2 12.9 22 32 45 48 70 73 74
50 *9.5 9.5 10.2 16.1 28 39 56 60 72 75 77
60 *9.5 11.1 12.2 19.3 33 47 67 72 74 76 79
70 *9.5 12.7 14.3 23 39 55 78 84 76 79 83
80 *9.5 14.3 16.3 26 45 63 89 96 78 82 84
90 *9.5 14.7 18.3 29 50 71 100 109 81 84 84
100 *9.5 15.9 20 32 56 79 112 121 83 86 86
110 *9.5 17.1 22 35 61 87 123 133 85 88 88
120 *9.5 18.3 24 39 67 95 134 145 87 90 90

Ordering Info

AD 3/8 SS 10
Nozzle Type Inlet Size Material Code Capacity Size

Inquiry To Our Expert

    Your Name*

    Your Email*

    Your Phone*

    Your Description*