DJ Automatic Air Atomizing Nozzle
DJ Series automatic air atomizing nozzles have an inner gas driver to control ‘on-off’, and can circulate 180 times per minute. When ‘on-off’ runs, only the liquid of the sprayer will be shut off. The liquid flow can be carried to the nozzle body by siphon, gravity or pressure.
1/4 DJ nozzle has air and liquid screw thread with the inlet size of 1/4 inch NPT or BSPT(female).
And screw thread gas driver inlet size of 1 /8 inch NPT or BSPT (female).
This type of nozzle is used with small-flow liquid cap.
45 Degree Type
1/8 DJ spray nozzle is a compact, automatic atomizing nozzle.
With a single inlet for atomizing gas and driver gas.
It keeps 45 degree angle between the inlet line and spray line.
1/8 DJ spray nozzle is a compact, automatic atomizing nozzle, With a pipeline for single gas.
It’s designed to be used in small area.
The size of screw thread air and liquid inlet is 1/8 inch NPTor BSPT(inner).
Single Gas Pipeline Type
With a single gas pipeline, 1/4 DJ nozzle can be used in atomizing and driving gas.
lt controls the pressure to drive the atomizing gas and liquid during ‘on-off period.
This type of nozzle requires 2 bar gas pressure at least, and could circulatel 80 times per minute.
Features of DJ Automatic Air Atomizing Spray Nozzle:
All the parts of CYCO spray nozzles are made accurately at strict quality control standard, to insure running smoothly and long service lifetime. The nozzle can be made of nickel-plating brass or stainless steel. Each nozzle has a stainless steel needle valve, a stainless steel flow cap and a stainless steel spring.
Corrugating Board Humidify
Ordering Info of DJ Automatic Air Atomizing Spray Nozzle:
|Nozzle Type||Material Code||Nozzle device No.|
Refering to D Series Parameter
You can email [email protected]nozzle.com for more information, and you will get a reply within 24 hours.
Reach out for an opportunity
inquiry to our expert