Project Description
Spiral Spray Nozzles
There are two kinds of spray patterns for the spiral nozzle, they are hollow cone and full cone with the angle from 60° to 170°. They can be made of stainless steel, brass, plastic, silicon carbide.
Because of the advantage of lower liquid chock risk, it wildly is used in gas cooling, gas scrubbing. Check it in below for more, or directly inquiry our expert.
Material: Silicon Carbide, Stainless Steel, Plastic
Spray Pattern: Full Cone, Hollow Cone
Spray Angle: 60°- 170°.
Capacity: 5.5-4140L/min.
SPIRAL NOZZLE FEATURES
CYCO has two kinds of spray patterns of spiral nozzle, they are full cone and hollow cone, which angle from 60° to 70°。
Under 3 Bar pressure, the flowing rate of liquid is 5.5 – 41410L/min.
It has an expedite flow channel design, which can decrease liquid barrier format, capacity with a certain size. The rotary spray nozzle can be installed or updated in lots of pipe system.
SPIRAL NOZZLE COMMON APPLICATION
- Exhaust gas scrubbing, including ship gas scrubbing, flue gas scrubbing.
- Gas cooling
- Washing and rinsing
- Fireproofing and fire extinguishment
Spiral Nozzle Performance Data
| Pipe Coon. NPT or BSPT (out) | Spray angle (0.7bar) (Degree) | Cap. Size | orifice size (mm) | Dia. w/o block (mm) | Capacity (L/min) (Bar) | ||||||||
| 60 | 90 | 120 | 150 | 170 | 0.7 | 1.5 | 3 | 7 | 25 | ||||
| 1/4 | ● | ● | ● | 07 | 2.4 | 2.4 | 2.6 | 3.9 | 5.5 | 8.4 | 16 | ||
| ● | ● | ● | ● | ● | 13 | 3.2 | 3.2 | 4.9 | 7.3 | 10.3 | 15.7 | 30 | |
| ● | ● | ● | ● | ● | 20 | 4 | 3.2 | 7.6 | 11.2 | 15.8 | 24 | 46 | |
| 3/8 | ● | 07 | 2.4 | 2.4 | 2.6 | 3.9 | 5.5 | 8.4 | 16 | ||||
| ● | 13 | 3.2 | 3.2 | 4.9 | 7.3 | 10.3 | 15.7 | 30 | |||||
| ● | 20 | 4 | 3.2 | 7.6 | 11.2 | 15.8 | 24 | 46 | |||||
| ● | ● | ● | ● | ● | 30 | 4.8 | 3.2 | 11.4 | 16.7 | 24 | 36 | 68 | |
| ● | ● | ● | ● | ● | 40 | 5.6 | 3.2 | 15.1 | 22 | 32 | 48 | 91 | |
| ● | ● | ● | ● | ● | 53 | 6.4 | 3.2 | 20 | 30 | 42 | 64 | 121 | |
| ● | ● | ● | ● | ● | 82 | 7.9 | 3.2 | 31 | 46 | 65 | 99 | 187 | |
| 1/2 | ● | ● | ● | ● | ● | 120 | 9.5 | 4.8 | 45 | 67 | 95 | 145 | 270 |
| ● | ● | ● | ● | ● | 164 | 11.1 | 4.8 | 62 | 92 | 129 | 198 | 370 | |
| 3/4 | ● | ● | ● | ● | ● | 210 | 12.7 | 4.8 | 80 | 117 | 166 | 255 | 480 |
| 1 | ● | ● | ● | ● | ● | 340 | 15.9 | 6.4 | 130 | 190 | 270 | 410 | 775 |
| ● | ● | ● | ● | ● | 470 | 19.1 | 6.4 | 179 | 260 | 370 | 565 | 1070 | |
| 1-1/2 | ● | ● | ● | ● | ● | 640 | 22.2 | 7.9 | 245 | 355 | 505 | 770 | 1460 |
| ● | ● | ● | ● | ● | 820 | 25.4 | 7.9 | 310 | 455 | 645 | 990 | 1870 | |
| ● | ● | ● | ● | ● | 960 | 28.6 | 7.9 | 365 | 535 | 755 | 1160 | 2190 | |
| 2 | ● | ● | ● | ● | ● | 1400 | 34.9 | 11.1 | 535 | 780 | 1105 | 1690 | 3190 |
| ● | ● | ● | ● | ● | 1780 | 38.1 | 11.1 | 680 | 995 | 1405 | 2150 | 4060 | |
| 3 | ● | ● | ● | 2560 | 44.5 | 14.3 | 980 | 1430 | 2020 | 3090 | 5830 | ||
| ● | ● | ● | 3360 | 50.8 | 14.3 | 1280 | 1880 | 2650 | 4050 | 7660 | |||
| 4 | ● | ● | ● | 5250 | 63.5 | 15.9 | 2000 | 2930 | 4140 | 6330 | 11960 | ||
** Brass or SS316 for higher pressure.
| Order Info | |||||
| 1/4 | SPJT | – | SS | 120 | 7 |
| ↓ | ↓ | ↓ | ↓ | ↓ | |
| Inlet Size | Nozzle Type | Material Code | Spray Angle | Capacity | |
Remark (Material Codes):
BRASS
SS – Stainless Steel
316SS – 316 Stainless Steel
TEF – TEFLON Poly Tetra Flouro Ethylence
PP – Poly Propylene
Inquiry to our Engineer Expert
