Project Description

Spraying Systems Air Atomizing Nozzle

You can email [email protected] for more information, and you will get a reply within 24 hours.

  • Inner structural design makes liquid and air mix fine, and then sprays fine. Normally, we could increase the air pressure or reduce the liquid pressure, so that we could make the nozzles spray more fine droplets (about 30micron).
  • Keeping liquid pressure and air pressure unchanged, as Adjustable air atomizing nozzle could adjust liquid flow rate, and then it also could spray according to your requirement.
  • Every spraying device consists of air cap and liquid cap. Spray pattern has flat fan, round, and wide- angle round spray. Nozzles also has widely flow rate. Inlet thread has different size which could be suitable for many pipe systems.
  • Air atomizing nozzle structure has pressure type, siphon type and gravity type.
  • Air atomizing device has two mixed type: inner mixed type and external mixed type. Inner mixed type could spray very fine, and it is suitable to use under many conditions. While, it is a good choose to use external mixed type to spray viscosity liquid.
Model Number D Series
Material stainless steel
Modes of Liquid Supply Siphon or pressured
Certificates ISO 9001, ISO14001, UL
Spray pattern Flat Fan, Round, Wide-angle round spray
Inch size 1/8, 1/4 and 1/2
Spray angle 50-90 degree
Siphon-fed Round Pressure-fed type
Certification:  ISO9001.ISO14001,UL
Thread size 0.15-0.5mm

Product Process

1.We have strong material suppliers.(Can ensure our material and quality for you.)

2.QC control system:100% QC inspection Before Shippment.(supply best products)

3. Inspected by the Inspection Institution of ISO9001 and TS16949 and enviroment certification.